Speed Queen AWNA62 - User Manual

Other manuals for Speed Queen AWNA62

Quick Manual4 pages

Questions and Answers

C
christineayalaAug 15, 2025
What to do if my Speed Queen Washer won’t fill?
- A
  Amber MatthewsAug 16, 2025
  If your Speed Queen washer isn't filling, try these solutions: First, ensure the lid is completely closed and the power cord is fully plugged into the electrical outlet. If the OPTIONS switch is set to HIGH EFFICIENCY, remember the rinse cycle uses a spray instead of filling the tub. Check that both hot and cold water faucets are turned on and the fill hoses aren't kinked. Press and hold the start button for two seconds. Ensure the controls are properly set and the last spin cycle has completed. Check the house fuse or circuit breaker. Clean the screens in the water mixing valve and the filter screens at the faucet end of the fill hoses. Also, ensure the drain hose is properly installed, referring to the Installation Instructions, to prevent water from siphoning during the cycle.
H
Hannah ClarkAug 19, 2025
Why does my Speed Queen AWNA62 Washer stop or pause during the cycle?
- N
  Nicole CraneAug 19, 2025
  Pauses during a cycle are a normal part of the Speed Queen washer's operation. Ensure the lid is closed for the cycle to advance. Check the house fuse or circuit breaker. The motor overload protector may have stopped the cycle; it will reset in two to three minutes and restart the washer automatically.
P
Peter SanchezAug 21, 2025
What to do if my Speed Queen Washer won’t start?
- M
  mistyhodgeAug 21, 2025
  If your Speed Queen washer isn't starting, make sure the lid is closed and press and hold the start button for two seconds. Ensure the power cord is fully plugged into the electrical outlet and that the controls are properly set. Check the house fuse or circuit breaker. Also, the motor overload protector may have stopped the cycle; it will reset itself in two or three minutes and restart the washer automatically.
K
Kimberly BurchAug 25, 2025
Why is my Speed Queen AWNA62 so noisy?
- D
  Damon ButlerAug 26, 2025
  If your Speed Queen washer is making excessive noise, the wash load may be unbalanced; open the lid and redistribute the load. Also, ensure the washer is level, as uneven leveling can cause vibration. A newly installed washer may make a knocking sound if the machine has been in storage; run the washer through 4-5 cycles to loosen the belt. Washer operation will not be affected.
N
nfordAug 28, 2025
What to do if my Speed Queen AWNA62 won’t drain?
- C
  cheyenne43Aug 28, 2025
  If your Speed Queen washer isn't draining, first check that the drain hose isn't kinked, twisted, or clogged. Also, make sure the drain receptacle isn't clogged. Refer to the Installation Instructions to make sure that the drain hose has been properly installed.
H
Hector DunnAug 30, 2025
Why is my Speed Queen AWNA62 not spinning?
- M
  Michael CraneAug 31, 2025
  If your Speed Queen washer isn't spinning, make sure the lid is closed and press and hold the start button for two seconds. Also, ensure the power cord is fully plugged into the electrical outlet and check the house fuse or circuit breaker. The motor overload protector may have stopped the cycle; it will reset itself in two or three minutes and restart the washer automatically. If the drive belt is broken, call a service person.
D
Dawn AndersonSep 3, 2025
How to fix water leaks in Speed Queen AWNA62?
- O
  ochurchSep 3, 2025
  To address water leaks in your Speed Queen washer, check that the fill hoses are properly installed on both the faucets and the washer's water mixing valve. Consider replacing the fill hoses every five years. Ensure the drain receptacle is not clogged and check your house plumbing. If the laundry load is oversudsing or overloaded, use low-sudsing, high-efficiency (HE) detergent and ensure proper load sizes.
M
Monica MartinezSep 5, 2025
What to do if my Speed Queen AWNA62 load is too wet?
- S
  Sara SuttonSep 5, 2025
  If your Speed Queen washer leaves the load too wet, the wash load may be unbalanced; open the lid and redistribute the load. If the load is too small, add items to make a full load.
J
Jonathan AdamsSep 9, 2025
Why is my Speed Queen Washer not agitating?
- A
  April ChangSep 9, 2025
  If your Speed Queen washer isn't agitating, ensure the lid is closed and press and hold the start button for two seconds. Keep in mind that pauses are a normal part of the washer’s operation. The wash portion of the cycle will alternate between agitation and pausing. Ensure the power cord is fully plugged in and check the house fuse or circuit breaker. The motor overload protector may have stopped the cycle; it will reset itself in two or three minutes and restart the washer automatically. If the drive belt is broken, call a service person.
D
dodsonjosephSep 12, 2025
Why is my Speed Queen AWNA62 Washer using the wrong water temperature?
- M
  Michelle LawsonSep 12, 2025
  If your Speed Queen washer is using the wrong water temperature, ensure the controls are properly set. Check the fill hoses to confirm the hot faucet hose is connected to the hot mixing valve (marked “H”) and the cold faucet is connected to the cold mixing valve (marked “C”). Also, ensure your house water heater is adjusted properly.

Summary

Safety Information

Explanation of Safety Messages

Defines DANGER, WARNING, CAUTION, IMPORTANT, and NOTE safety message types for user guidance.

Important Safety Instructions

Provides essential safety precautions to reduce risk of fire, shock, or injury when using the washer.

Operation

Prepare Wash Load

Guides on preparing clothes by emptying pockets, mending, closing fasteners, and checking colorfastness.

Sorting Items

Explains guidelines for sorting laundry by color, fabric, temperature, soil level, and lint shedding.

Loading the Washer

Instructions on how to load clothes properly by space, not weight, and water level considerations.

Wash Temperature

Details on using Hot, Warm, and Cold water for washing, and energy-saving guidelines.

Operating Your Washer

Explains how to select cycles (Normal, Perm Press, Delicate) and options for optimal washing.

To Wash Clothes

Step-by-step guide to loading, adding detergent, and starting the wash cycle with HE detergent.

Optional Features

Information on using the Bleach Dispenser and Fabric Softener Dispenser.

Clothing Care

Clothing Care Labels

Explains common laundry symbols for wash, dry, bleach, and iron care.

Washing Special Items

Guides on washing specific items like bedding, diapers, curtains, pillows, rugs, shoes, and various knits.

Clothing Concerns

Addresses common clothing issues like dingy/yellowed clothes, tearing, and provides solutions.

Laundry Products

Details on using laundry aids like soak/pretreat products, detergents/soaps, and bleaches.

Stain Removal

Provides instructions for treating various common stains on fabric.

Maintenance

Cold Weather Care

Advice on handling the washer during cold weather delivery or storage.

Care of Your Washer

Guidelines for cleaning the control panel, cabinet, and checking filter screens.

Replacing Hoses

Recommendations for checking and replacing washer hoses due to deterioration.

Vacations and Extended Non-Use

Instructions to prevent damage, like flooding, during periods of extended non-use.

Reinstallation of Shipping Materials

Steps for reinstalling shipping brace and plug when moving the washer.

Motor Overload Protector

Explains the function of the motor overload protector and how it resets.

Preventative Maintenance

Schedule and procedures for monthly, six-month, and five-year preventative maintenance checks.

Troubleshooting

Wont Fill

Lists causes and solutions for the washer not filling with water.

Wont Start

Provides troubleshooting steps for when the washer fails to start.

Wont Agitate

Solutions for issues related to the washer not agitating.

Wont Spin

Troubleshooting tips for when the washer does not spin.

Stops;Pauses During Cycle

Explains normal pauses and troubleshooting for unexpected stops.

Wont Drain

Solutions for the washer failing to drain water.

Water Leaks

Identifies causes and remedies for water leaks from the washer.

Is Noisy

Explains potential causes of noise and solutions, including leveling.

Load Is Too Wet

Addresses why loads might be too wet and how to fix it.

Wrong Water Temperature

Troubleshooting for incorrect water temperature during cycles.

Contact Information

Speed Queen AWNA62 Specifications

General

Brand	Speed Queen
Model	AWNA62
Category	Washer
Language	English

Related product manuals

Speed Queen AFNE9RSP113WH