EasyManua.ls Logo

SpeedFun GHOST - Neat Wiring and Casing Closure; Permanent Compensation Elimination

SpeedFun GHOST
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ELIMINAZIONE DEFINITIVA COMPENSAZIONE
PERMANENT ELIMINATION OF COMPENSATION
Per eliminare definitivamente la compensazione della
percorrenza, tagliare il filo bianco nel punto indicato dalla
freccia.
E' indispensabile isolare le due estremità.
To definitively eliminate the distance compensation, cut the
white wire at the point indicated by the arrow.
It is essential to isolate the two ends.
Questo è il connettore a 8 Pin estratto dal motore.
This is the 8 Pin connector extracted from the motor.
Collegare ora i corrispondenti connettori di Ghost.
Now connect the corresponding Ghost connectors.
Disporre ordinatamente il dispositivo elettronico e i fili.
Richiudere il carter.
NON PREMERE sui fili e sul dispositivo elettronico; si può
danneggiare irreparabilmente.
Arrange the electronic device and wires neatly.
Close the plastic casing.
DO NOT PRESS on the wires and on the electronic device; it
can be irreparably damaged.
Pagina 3/4

Related product manuals