Need help?Do you have a question about the SpeedFun GHOST and is the answer not in the manual?
Remove the e-bike battery before performing any operations to ensure safety.
Unscrew and remove the plastic side cover by passing the pedal through the hole.
Carefully extract the motor connector by its plastic body and connect the Ghost dongle.
Arrange wires neatly, close the plastic casing, and avoid pressing on the electronic device.
Cut the white wire at the indicated point and isolate both ends to permanently disable compensation.
Activate speed release by pressing the Light button on the handlebar control.
Disable automatic light function via menu by setting 'Al Sensitivity' to 'ZERO'.
General| Color | Black |
|---|---|
| Compatibility | Brose |
| Features | Speed display |
| Material | Plastic |
| Installation | Easy installation |
To Next Page
