16 SPEKTRUM DX3R PROGRAMMING GUIDE
Model Copy
01: Model 01
Mo de l
Select:
Name:
Model 01
◊
Copy To:
02: Model 02
≤
To aCCess The
Model Copy funCTIon:
In the Model screen use the roller to highlight
the Copy To function. A box will surround the
Copy To function.
Press the roller to access the Copy To function.
The box will now be flashing, indicating the Copy To
function has been selected.
Use the roller to select the desired model that you
choose to copy to (models 01 thru 30).
When the desired model that you intend to copy to
is selected, press the roller. The screen will appear
as follows:
Co nf ir m
Co py
01 : M od e l 01
to
02 : M od e l 02
NO
YE S
≤
If the selected model is correct, use the roller to
highlight YES and press the roller to copy from the
current model to the selected model.
Note: The model memory of the selected
model will be replaced with the current model’s
model memory, thus erasing the copy to
model’s memory.
To return to the Main screen, press and hold the
roller for more than three seconds.
To Next Page
Loading...
Need help?
General
