Program
Local/Remote
Mode
99 1 ASCII 0 or 1
6.5 RESPONSE OVERVIEW
The command responses will follow the same format as outlined above in
section 6.1. This list is comprised of Commands with complex responses
only. Commands using a simple response will use the <$> character
(ASCII 0x24) as a “Success” response or a single character error code.
These responses will be eight ASCII characters in length.
Response Name <CMD> Response
Request kV
Setpoint
14 8-11 ASCII
Request mA
Setpoint
15 8-11 ASCII
Request Analog
Monitor
Readbacks
19 12-23
ASCII
Request Total
Hours High
Voltage On
21 14 ASCII
Request Status 22 13 ASCII
Request DSP
Software Version
23 18 ASCII
Request Hardware
Version
24 10 ASCII
Request Web
Server Version
25 18 ASCII
Request Model
number
26 12 ASCII
Request User
Configs
27 9-17 ASCII
Request unit
Scaling
28 24-32
ASCII
Read Interlock
Status
55 8 ASCII
Request kV
monitor
60 8-11
ASCII
Request mA
monitor
61 8-11
ASCII
Request –15V
LVPS
65 8-11
ASCII
118080-001 REV A Page 70 of 95
To Next Page
Loading...
