Need help?Do you have a question about the Spellman EBM30N/TEG and is the answer not in the manual?
Safety precautions and guidelines for servicing the unit by qualified personnel.
Specifies the voltage and current ratings for the various outputs of the EBM30N/TEG unit.
Explains the functionality and reference of the Bias Output and Bias Cancellation Supply.
Presents a schematic overview of the unit and its interconnection with the SEM.
Details the operating and storage temperature and humidity ranges for the unit.
Defines the meaning of safety symbols used in the manual and on the equipment.
Provides instructions for physically mounting the unit within the end product.
Details the power requirements and electrical specifications for installation.
Guides on connecting the unit to the power source and other components.
Details the pinouts and functions of the analog and digital I/O connectors.
Information on the accessory kit for low voltage connectors.
Describes the high voltage connector type and available cable assemblies.
Details the bespoke receptacle and available cables for scintillator output.
Specifies the industry standard connectors used for PMT and Collector outputs.
Explains the analogue and digital inputs used to control the unit's functions.
Details the analogue and digital outputs for monitoring the unit's status.
General| Output Voltage | 0 to 30kV |
|---|---|
| Power Rating | 30W |
| Input Voltage | 100-240VAC |
| Cooling | Convection |
| Polarity | Positive or Negative |
| Frequency | 50/60Hz |
| Ripple | 0.1% |
| Efficiency | 85% |
| Ripple and Noise | <0.1% p-p |
| Temperature Range | 0°C to +40°C Operating, -20°C to +70°C Storage |
To Next Page
