Sper scientific 800015 - Features, Buttons & Operation

1. Indoor Temperature Reading
2. Outdoor (remote) Temperature Reading
3. Indoor Humidity (RH) Reading
4. Clock / Alarm Display- Selectable 12 or 24 hour system
5. Min/Max Button:
- Press MIN/MAX to display the maximum
temperature and maximum humidity.
- Press MIN/MAX again to display the minimum temperature
and minimum humidity.
6. Reset Button:
- Press RESET while in the MIN/MAX display to clear
the MIN and MAX temperature & humidity values.
7. Adj Button:
- Press to select 12/24 hour system when clock is displayed.
8. Mode Button:
- Press >3 sec. to enter clock setup, press ADJ to change
minutes, press MODE to move to hours, press ADJ to
change hours, press MODE again to exit clock setup.
- Press to change clock display to show alarm time (indicated
by the symbol). When alarm time is displayed, press MODE
>3 sec. to enter alarm setup, press ADJ to change minutes,
press MODE to move to hours, press ADJ to change hours,
press MODE again to exit alarm setup.
- To turn o󰀨/on the alarm, change the press MODE to show the
alarm time, and then press ADJ. indicates the alarm is on.
9. °C/°F Button: Selectable °C/°F display.
Features, Buttons & Operation