Need help?Do you have a question about the Sper scientific WBGT and is the answer not in the manual?
General| WBGT Range | 32.0 to 122.0°F (0.0 to 50.0°C) |
|---|---|
| Black Globe Temperature Range | 0 to 80°C (32 to 176°F) |
| Resolution | 0.1°C (0.1°F), 0.1% RH |
| Accuracy | ±3%RH |
| Operating Temperature | 32.0 to 122.0°F (0.0 to 50.0°C) |
| Storage Temperature | -20 to 60°C (-4 to 140°F) |
A composite temperature used to estimate the effect of temperature, humidity, wind chill, and solar radiation on humans.
Temperature measured by a black globe thermometer, monitoring direct solar radiation's effect on an exposed surface.
The standard temperature as normally referenced in weather observations and forecasts.
The percentage of water vapor present in the air.
Indicates environment type (indoor/outdoor) for measurements, using specific equations for each.
Instructions on how to turn on the meter, select measurement modes (RH, WBGT, TA, TG), and choose indoor/outdoor settings.
Troubleshooting steps for when the meter display shows no output, including checking power and battery contacts.
Solutions for a disappeared display, such as replacing batteries or disabling automatic power-off.
To Next Page
