Need help?Do you have a question about the Sper scientific 860032 and is the answer not in the manual?
General| Model | 860032 |
|---|---|
| Category | Measuring Instruments |
| Display | LCD |
| Power Source | 9V battery |
| pH Range | 0 to 14 pH |
| pH Resolution | 0.01 pH |
| ATC | Yes |
| Data Logging | No |
| Resolution (Temperature) | 0.1°C |
| Accuracy (Temperature) | ±0.5 °C |
| Memory | No |
| Waterproof | Yes |
| Measurement Range (Temperature) | 0 to 100 °C |
Details the functions of each button on the meter's keypad.
Introduces the Setup Mode and its available customization options.
Explains how to view the slope and offset values for a pH probe.
Explains how to review past calibration data for a conductivity probe.
Details how to select between NIST and CUSTOM pH buffer types for calibration.
Explains how to view the cell constant for each range of a conductivity probe.
Explains how to select standard solutions for conductivity probe calibration.
Details the two options for calibrating the TDS measurement.
Explains the procedure for salinity calibration and its ranges.
Provides instructions for taking pH measurements with the meter.
Details how to perform mV measurements using a pH probe.
Explains how to conduct ORP measurements using an ORP probe.
Guides the user through performing conductivity measurements with the meter.
Details the procedure for measuring Total Dissolved Solids (TDS) using the meter.
Explains how to perform salinity measurements using the meter.
Explains various error codes displayed by the meter and their meanings.
To Next Page
