7.0
Accessories: Vials, Vial Opener, Racks, and Extractors
(If not included in your order, they are available for purchase at additional cost)
6754 Extractor
The 6753 Microvial Set consists of the standard 6751E end-
lugs, a 25048 polycarbonate tube with holes drilled in it fo
circulation of liquid nitrogen, and three 6753V Microvials, each
with its own steel end-plugs (25049), impactor (37582), an
tube (25050). The Microvial Set is used for samples on the
order of several hundred milligrams
The 6754 Extractor is a dual-
urpose tool for opening chille
vials, and transporting them i
and out of the Freezer/Mill. One
is supplied with every
Freezer/Mill
The standard 6751 Vial can be converted to an all-
steel vial by substituting a 6752 Steel Center
Section for the 6751C polycarbonate tube.
OT
: The open end o
the 6754 Extractor fits
over the flanged end-plug
of a vial, and the screw
threads into the hole in the
end-plug (see page 17).
Note: Whenever you handle a chilled
vial, we advise using cryogenic gloves.
6900 Cryogenic Gloves
(Available in Medium,
Large, X-Large)
Page 20 of 28
To Next Page
Loading...