Thank you for choosing our product. Before using the product, please read this manual in full.
1. Product Features
1. Automatic system voltage identification
2. Charging program options for sealed, GEL (DEFAULT), Sealed, flooded lead-acid batteries and lithium batteries types
are available.
3. An upgraded 3-stage PWM charging algorithm is adopted. Application of an equalizing charge to the battery periodically
or when over discharged, can effectively prevent the battery from non-equalization and sulfuration, thus extending the
battery's service life (with the exception of GEL and lithium batteries).
4. With temperature compensation employed, charging parameters can be automatically adjusted (with the exception of
lithium batteries).
5. A wide range of load working modes facilitate the product's application to different types of street lights and monitoring
devices. *Some loads can have excessive start up currents that can trip the logic of the controller, if using for Load
connection please consult your dealer firstly to ensure the current startup or peak current does not exceed the rating of the
controller.
6. The product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection
protection.
7. A range of parameter settings and power-down saving functions are available, thus requiring no repeated setting.
8. The product provides a dot matrix graphic LCD screen and easy to use interface with only 2 keys.
9. Boasting an industrial grade design, the product can function well in various tough conditions.
10.TVS lighting protection is adopted.
2. Panel Structure
To Next Page
Loading...
Need help?
General