SPHINX MYTH 5 - Connecting the Inputs; Connecting a Recorder; Connecting a Turntable; Connecting a CD Player

SPHINX Myth 5
7
Connecting the inputs
The amp has five unbalanced inputs.
The unbalanced line inputs are:
LINE 1 and
LINE 2 for any unbalanced
line signal,
TUNER for a tuner,
CD for a CD player,
TAPE IN for a recorder.
Connecting a recorder
Connect the input of the recorder to the TAPE OUT
output (14.)
Any input signal selected with buttons 2., 3., 4. or 5.
and which you will hear via the loudspeakers is also
sent to this output.
Connect the output of the recorder to the TAPE IN
input (15.)
Connecting a turntable
There is no specific RIAA phono-input. When using
a turntable you should pre-amplify the signal with a
separate phono pre-amp (or pre-pre-amp).
Connect the unbalanced output of a phono pre-amp
to one of the cinch inputs LINE 1 or LINE 2.
Connecting a CD player
Connect the unbalanced output of a CD player to
the CD input (13.).
Connecting a tuner
Connect the unbalanced output of a tuner to the
TUNER input (12.).
Connecting other signal sources
LINE 1 and LINE 2 are available for any other signal
sources.