SPIDO COMBO-S2 - Inside the Box

EN
a trained professional and adhere to
local code and regulations.
• Avoid electric shock. DO NOT USE
pow er extension cords.
• Never submerge the lter and/or
pump in water.
• Never place the pump or lter in your
pool.
• Trapped air in the pump-lter system
may cause the TANK COVER to be
blown off which can result in death,
serious injury, or damage to the pump-
lter system. Ensure all air is out of
system before operating.
• NEVER change the 7 Position
Multi-Port valve while the system is
operating.
• ALWAYS unplug the system before
changing the control valve.
• Instal this product with a sufcient
safety margin from the pool to prevent
children from using the system to
access the pool.
• Never PLUG or UNPLUG this unit
from an electrical source while standing
in water.
• NEVER service this unit with the
electrical power cord connected.
• Do NOT operate the system while the
pool is being used.
• KEEP CHILDREN AWAY from all
electri cal equipment.
• NEVER ALLOW CHILDREN TO
OPERATE THIS EQUIPMENT
• The Pool Owner should always
exercise The Pool Owner should
always exercise
We cannot be responsible for damages
to the product if the product is not used
in accordance with the instructions
provided.
2. INSIDE THE BOX
The pump included with the ltration
system is a horizontal, self priming
centrifuge pump. For the pump
to function correctly, the wa ter
temperature must not exceed 35°C /95°
F. The materials used in the pump have
undergone stringent hydraulic testing
and electrical inspections.
The lter included in the ltration system
consists of high-grade pol ypropylene
(PP). It is seamless and manufactured
as a single unit (absolutely corrosion
resistant and resistant to commercially
availa ble swimming pool chemicals).
(Prerequisite: Compliance with the
standard recommended specications
for the pH- and chlorine value). It is
equipped with a container drainage
system, pressure gauge, built-in
container components, e.g. bottom
strainer for even water distribution and
a stable PE separation wall between the
lter and the fresh water chamber. The
lter container comes ready to plug-in
and is supplied with a user-friendly 7
Position Multi-Port Valve integrated into
the tank cover, an approved lter pump
with hair and lint basket, and a plastic
base for ready on-site mounting.
Read this manual carefully before
installation. The ltration system and
pump must be installed in accordance
with the standards in ef fect.
Damageduringdelivery
Your lter system has been carefully
and professionally packed for delivery.
Please check to ensure that the
package is undamaged and that ail