Choose the period you would like to visualize by using the arrow keys up/down
Insert the user you would like to visualize
If you choose “User 00” you will see all the operations displayed
Printer key to print out the visualized data (printer version only)
6.10 PRINTING OF THE PERFORMED OPERATIONS (Printer version only)
NOTE: In the Printer version it is possible to print out the performed operations at the end of the cycle
Printing of the performed operations, of the vehicle, of the vehicle’s plate and the Km.
Press the Print key
Use the Enter key and the arrow keys to change the displayed parameter
After selecting it, change the displayed parameter by using the arrow keys up/down
To modify the parameter use the arrow keys right/left
Press Enter to confirm
Pres the up/down keys to go on to the following/previous parameter
Press “C” to cancel
Note: it is possible to insert brand, model and km
Printing of the performed operations (without vehicle’s data)
Press the Printer key for more than two seconds
To Next Page
Loading...
