Spinel S.r.l. 27
The use of attachments not recommended by the manufacturer may
cause fire, electric shock or injury to persons
In case of incompatibility between the socket and the appliance plug,
have to replace the socket with another suitable type by qualified
personnel.
RECEIVING AND UNPACKING
The pod coffee machine mod. CIAO is packed in a carton box with inside an upper and lower
shaped section. Open the box and remove the protective sheets in order to take hold of the bottom
of the machine. Rest the machine on a flat surface for the preliminary operations and to check the
machine’s integrity.
For any doubts, please call any of Spinel service centres.
Forwarders will be held responsible for any breakage or failure related to transport.
POSITIONING AND INSTALLATION
All machine installations and settings must be carried out by authorized
technical staff only.
Spinel S.r.l. is not liable for damages to the machine due to improper
installation of the same, incompetence or negligence of the personnel
responsible.
Make sure that power voltage and frequency match with the machines
data shown on the machine plate.
The equipotential protection circuit must be checked at least once a year.
It is necessary to install a proper overcurrent protection device on top of
the power supply cord.
The following automatic protection switches are recommended:
CIAO
Magnetothermic switch In=10 A Icc=4.5 kA 2P
Tab. 1 - Automatic protection switches
To Next Page
Loading...
