28 Spinel S.r.l.
After checking that the machine is complete, place it on a stable and
perfectly horizontal surface in order to allow enough space for carrying
out all operations easily and safely (Insertion water bottle, fitting the pod,
cleaning and maintenance).
SWITCHES AND THEIR FUNCTIONS
Coffee groups general switch (ON/OFF) (A): When the switch is moved to ON, this switches on
the coffee group. If the Coffee Group Light (C) is off, the coffee group is ready for delivery; if it is
on, the temperature is not optimum and it is preferable to wait a few seconds until the light
switches off before the next delivery.
Coffee brewing switch (B): Pressing it will deliver the coffee; pressing it again will stop the
delivery.
Stand-by light (D): The machine has been designed to respect the environment and reduce energy
consumption when not in use. After 15 minutes of inactivity the machine will automatically shut
off and the standby light flashes. To restore normal operation of the machine turn the ON / OFF
switch (A) and turn it back on after 3 seconds.
MACHINE OPERATION AND USE
Fill the PET water bottle and insert this in the case bottle holder, taking care to inserting the
pipes back into the bottle without obstructions or folding.
Insert the plug into the power supply socket.
Make sure that the coffee groups general switch (ON/OFF) (A) is set on the ON position.
Remove the pod from its protective packaging by tearing the edge.
Fit a pod inside the bottom pod holder, making sure that it is well centered.
Push the closing lever (E) downwards until it stops in order to tighten the coffee brewing
group.
Place the cup on the cup holder rack (G).
Press the coffee brewing switch (B). When the required amount of coffee has been
delivered, press the coffee brewing switch (B) again to stop delivery.
Once the coffee has been delivered, move the closure lever (E) up (initial position) and
remove the used coffee pod.
WARNING: In the machine stop position, the lever needs to be moved
upwards.
To prepare more than a coffee, repeat the sequence from the beginning.
To Next Page
Loading...
