Spinel S.r.l. 29
OPERATING FAULTS
The machine may not work because:
the plug hasn’t been inserted into the socket;
the switch ON/OFF haven’t been pressed;
no water in the bottle;
filters are blocked.
The cause of failure in preparation of the drink can be:
the pod holder is not properly closed;
an exhausted pod is being used (pod is single-dose);
If the cause of the failure does not correspond to those listed above, it is necessary to contact one
of our service centers.
GENERAL SERVICING
POWER CABLE
Regularly check the power cable. If it is worn or damaged, it should be replaced by authorized
personnel.
CLEANING AND MAINTENANCE
For a proper usage of the machine and a high standard quality coffee, it is highly recommended to
regularly clean the machine. These operations have to be done when the machine is cold and
unplugged to the power supply.
DRIP TRAY CLEANING:
Empty the tray daily and wash with warm water.
EXTERNAL CASE and CUP RACK
They should be cleaned using a cloth soaked into specific neutral detergent and warm water.
DECALCIFICATION
The limestone formation is a natural consequence of the use of the machine. We recommend
executing periodically (the appearance of limestone within the water druft pipe) decalcification
themachine in order to avoid malfunctions that are not covered by the warranty. Only use products
for descaling coffee machines and follow the instructions on the package of the same product. Do
not use vinegar, lye, salt, formic acid because they may damage the machine.
To Next Page
Loading...
