Spinlock ALTO - How to Check Inflation System Status; Donning and Inflating the Device

HOW TO CHECK INFLATION SYSTEM STATUS
1. Open cover and check the firing unit is armed
Check Green indicator clip is in place
Check 16g cylinder has not been
pierced before use and ensure the
cylinder is screwed in hand tight
DONNING AND INFLATING THE DEVICE
1.
2.
4.
5.
3.
To inflate device
pull manual handle
Position device
around waist
Once inflated position the
bladder under the arms
Secure buckle
and tighten webbing
according to waist size
To inflate via oral
tube, remove cap
and blow into tube
Pour le texte en
français, veuillez
consulter la page 15
2