RE-ARMING AND RE-PACKING YOUR DEVICE
2. Remove cylinder from device by
unscrewing counter clockwise
3. Close the red manual arm and
insert new green indicator clip
4. Check gasket where cylinder is
threaded into firing unit and
replace if worn.
Install new 16g cylinder, checking
it has not been pierced and hand
tighten clockwise into unit.
1. Deflate bladder via oral tube
whilst gently squeezing bladder
5. Fold bladder along the markers
in order of 1 to 7
Pour le texte en français,
veuillez consulter la page 15
Re-arming kit required - DW-RAK75
Re-packing video can be found via scanning QR code
To Next Page
Loading...
