Battery Charging
To extend the life of your battery please follow these guidelines.
• Charge the battery after each use.
• Don’t leave your battery in a at state for extended periods.
• Don’t leave the battery plugged into the charger after it is fully charged.
Your battery will take 8 to 15 hours to fully charge. The LED on the charger
pack will turn green when the battery is fully charged. If the LED stays red
leave it charging.
A fully charged battery will provide approximately 2-3 hours of use. High
ball speed and spin requires more power and therefore will drain the battery
faster.
Internal Battery Model
Plug the battery charger into a electrical outlet and insert battery charger
cable into the charger socket on the control panel.
Hybrid Power / External Battery Kit
Unplug the battery from the machine.
Plug the battery charger into an electrical
outlet and then connect the battery
charger cable to the battery cable port
(as pictured).
5
To Next Page
Loading...
