Why does the reset button pop out and turn off the machine?
A ball jammed maybe inside the machine and is blocking the normal
operation of the service wheels. Do not use wet, or very soft tennis balls as
these will cause a jam.
My machine is battery powered. Can I upgrade it to support
main’s power?
Yes, you can change the battery to main’s power module. See http://www.
spinshotsports.com/power.html for more options.
Why does my machine always serve balls across the right side line,
when I set the horizontal position to 20?
Because you did not properly place the machine in the right direction. Turn
the machine slightly to the left direction should correct this problem.
After creating a new drill, will it be exactly the same next time I
use the same drill?
Yes, every time you use the drill you will get a consistent result if you use
the same batch of balls. Please don’t forget to charge the battery after each
use. A at battery can make the ball machine less powerful and impact the
consistancy of balls thrown.
I see from the website that a phone remote is an option. Will that
be an optional extra for the player model?
No, the phone remote feature is a standard part for the player model.
In Manual mode, can I adjust the horizontal direction?
Yes. After you press the Manual Mode button on the Dril Maker App, select
the Horz button to adjust the horizontal direction of the machine.
How can I adjust the setting to slow down the ball shots when I
apply random height settings?
When user set the HGHT level to R or 0, the machine will shoot balls in
random height angle, and the ball speed is not controllable by the user. The
only way user can adjust the ball speed is by adjusting the ball SPIN. The
higher spin level will make ball slower.
Section 6: FAQs
15
To Next Page
Loading...
