User Manual, Spintso Referee Watch S1 PRO, vers 3.0
4 (32)
2. Overview and Abbreviations
3. Start-up
3.1. Content
The following items are included:
- Spintso referee watch S1 PRO.
- USB charging cable.
- Quick start manual & information sheet.
3.2. Peel off
Before using your new watch, please remove the screen protector and the thin transparent plastic lm
that covers the heart rate sensor.
3.3. Activation
Press and hold Button A until the bar on the screen rises to maximum. Then release the button.
Spintso logo arcs shall appear for a moment and when the clock face appears the watch is ready.
4. Charging
Connect the included charging cable between your watch and a
standard USB-A charging port. Make sure the pogo pins on the
charging clip align properly to the watch charging interface. If wet,
the watch exterior shall be wiped dry before charging.
The watch will briey light the display and indicate charging when
charging power is applied.
Charging time is up to three hours and is complete after the display
shows a fully charged battery. Press button A to see current charg-
ing status.
Button A
Button B
Heart rate
Sensor
Charging
interface
Latch for
bracelet
To Next Page
Loading...
