Need help?Do you have a question about the Spirax Sarco AEL54211 and is the answer not in the manual?
Precautions and requirements for safe electrical wiring of the actuator, including isolation and earth conductor integrity.
Instructions for using the handwheel for manual actuator control during power failure or installation.
Step-by-step instructions for attaching the actuator to a control valve using the handwheel.
Specific mounting instructions and adaptor requirements for AEL51, AEL52, AEL53, AEL54, and AEL55 actuators.
Specific instructions for connecting the AEL56 actuator model, including disc spring assembly.
Procedures for safely removing and reattaching the actuator's protective cover.
Specific steps for cover removal and fitting on AEL51, AEL52, AEL53, and AEL54 actuators.
Essential information and precautions for wiring the actuator to the mains supply.
Wiring connections for actuators equipped with positioner cards for 4-20 mA signals.
Wiring connections for actuators equipped with positioner cards for 2-10 V signals.
Procedure for setting limit switches and stroke indicators for 2-port control valves.
Procedure for setting limit switches and stroke indicators for 3-port control valves.
Instructions for commissioning actuators with positioner cards using 4-20 mA or 2-10 V signals.
Precautions and requirements for safe electrical wiring of the actuator, including isolation and earth conductor integrity.
Instructions for using the handwheel for manual actuator control during power failure or installation.
Step-by-step instructions for attaching the actuator to a control valve using the handwheel.
Specific mounting instructions and adaptor requirements for AEL51, AEL52, AEL53, AEL54, and AEL55 actuators.
Specific instructions for connecting the AEL56 actuator model, including disc spring assembly.
Procedures for safely removing and reattaching the actuator's protective cover.
Specific steps for cover removal and fitting on AEL51, AEL52, AEL53, and AEL54 actuators.
Essential information and precautions for wiring the actuator to the mains supply.
Wiring connections for actuators equipped with positioner cards for 4-20 mA signals.
Wiring connections for actuators equipped with positioner cards for 2-10 V signals.
Procedure for setting limit switches and stroke indicators for 2-port control valves.
Procedure for setting limit switches and stroke indicators for 3-port control valves.
Instructions for commissioning actuators with positioner cards using 4-20 mA or 2-10 V signals.
General| Brand | Spirax Sarco |
|---|---|
| Model | AEL54211 |
| Category | Controller |
| Language | English |
To Next Page