50
10.10.8 ALARM MENU
LIFT (alarms occurs if the valve does not lift of the seat within lift time)
Only available if the switch is fitted and selected
Ranges ON or OFF
Default ON
LATCH (alarm relay can be latched until commissioning mode is entered)
Only available if the switch is fitted and selected
Ranges ON or OFF
Default OFF
10.10.9 TEST MENU
DISPL AY
Ranges Black-on-white or white-on-black
Default Black-on-white
INPUT - INT TEMP
(Maximum internal temperature of the electronics)
Ranges -40 to +85°C or -40 to +185°F
Resolution (steps) 1
Units °C or °F
INPUT - LINK
(detects if other boilers are blowing down)
Ranges ON or OFF
INPUT - SWITCH
(detects if the switch is open or closed) Only available if the switch is selected
Ranges OPEN or CLOSED
OUTPUT - VALVE
(opens or closes valve manually)
Ranges ON or OFF
Default ON
Press the
OK
button to activate relay - Automatic control of relays is selected by selecting
cancel or after 5 minutes has elapses.
OUTPUT - ALARM (De-energises or energises the alarm relay manually)
Ranges ON or OFF
Default ON
Press the
OK
button to activate relay - Automatic control of relays is selected by selecting
cancel or after 5 minutes has elapsed.
10.10.10 SET PASS MENU (Set pass code)
Ranges 0000 - 9999
Default See Section 2
Resolution (steps) 1
To Next Page
Loading...
