Spirax Sarco SX100e - User Manual

IM-S27-12 CH Issue 1 1
SX100e Controller
Quick Set-up Manual
Installation and Maintenance Instructions
IM-S27-12
CH Issue 1
2230054/1
1. Introduction
2. General
product information
3. Controller modes
4. Selecting, defining,
running and stopping
a program
5. SX100e
Commissioning
instructions
6. Record of settings
Printed in the UK
© Copyright 2003
AT
MAN
82
EV1
EV2
EV3
RUN
HLD
SET
PRG
MODE
PROG RUN\ STOP
67
65
pow:
50%
SX100e

Spirax Sarco SX100e Specifications

General

Supply frequency	50/60 Hz
Power consumption	10 VA
Display	LCD
Supply voltage	100 to 240 Vac
Ambient temperature	0 to 50 °C
Storage temperature	-20°C to +70°C
Humidity	95% RH non-condensing
Protection standard	IP65
Inputs	4 to 20 mA, Pt100
Outputs	4 to 20 mA, Relay
Power Supply	100 to 240 Vac
Operating Temperature Range	0 to 50°C
Accuracy	±0.5% of span
Communication	Modbus RTU
Type	Electronic temperature controller