Spireon FleetLocate FL12 - User Manual

©2017 Spireon, Inc. All rights reserved.
FL12
™
, 12HP/EQ
™
GPS Tracking Device
KIT CONTENTS:
· FL12/12HD Tracking Device (w/ internal antenna &
integrated harness)
· Power Harness
MOUNTING HARDWARE:
• Plate Mounted Covert:
(1x) FL12 mounting plate (3-1177)
(2x) Serrated flange nuts
(4x) Countersunk screws
• Nose Mount
(2x) #10 x ¾” TEK self-drilling screws
ADDITIONAL REQUIRED HARDWARE
(NOT INCLUDED):
• (3x) 16-22ga. ring terminals
• 6” zip-ties
IMPORTANT NOTE:
The switched power source should read 0v
with the key in the o position and 11- 14v in
the on position. For EQ installations, a 5-wire
relay (not included) must be installed
CAUTION:
Us the vehicle’s factory service manual and
a digital voltmeter to be sure that you’ve
located the appropriate wires.
REMEMBER:
When properly installed there must be an
unobstructed line of sight between the
device’s antenna and the sky. Any metallic
objects that are positioned above the device
could interfere with GPS reception.
WIRE DESCRIPTION
DEVICE HARNESS:
Black – Power Harness (Black)
Red – Power Harness (Red)
Blue – Input 1 (- trigger)
Orange – Input 2 (- trigger)
POWER HARNESS:
Brown – J560 Pin #6
Blue – J560 Pin #7
White – J560 Pin #1

Summary

Installation Overview and Components

Kit Contents and Hardware

Lists all items included in the kit and required additional hardware for installation.

Wire Description

Details the wire colors and their functions for device and power harnesses.

Mounting Procedures

Dry Van Mounting

Instructions for mounting the device in dry vans via different methods.

Additional Trailer Type Mounting

Mounting guidance for flatbed, chassis, and tanker trailers.

Device Harness Running and Connection

Dry Van Device Harness Running

Steps for routing the device harness for nose and covert mounts in dry vans.

Additional Trailer Types Device Harness Running

Harness routing for flatbed, chassis, and tanker trailers.

Connecting to Power and Ground

Instructions for connecting the device harness to power and ground wires.

Equipment Tracking Installation (FL12 EQ)

Mounting the FL12 EQ

Guidance on securely mounting the FL12EQ device on asset exterior surfaces.

Running the Wire Harness

Steps for connecting the FL12EQ harness to power, ground, and ignition.

LED Verification and Installer Portal

LED Verification

Procedure to verify device functionality using LED indicators.

Spireon Mobile Installer Portal

Steps to log in and validate the installation via the installer portal.

Spireon FleetLocate FL12 Specifications

General

Brand	Spireon
Model	FleetLocate FL12
Category	GPS
Language	English