Spirit T-COM VB - TCOM-SC Intercom Pairing; Pairing 2 Devices In Intercom Mode; Pairing 3 Devices In Intercom Mode

5.
To transfer the sound back to your mobile phone. During a call using your
headset, press the Multi-function button for about 2 seconds. if your headset
woks with Headset Profile, you just need turn down your headset.
6.
To transfer sound from mobile phone to headset. If you make a call using
your phone, you can transfer the sound to the headset if the headset is on by
pressing the Multi-function button for about 2 seconds.
7.
Talking a phone call while in intercom mode. While speaking though the
intercom function to another device, a phone call will be heard through the
headset speaker. Press the Multi-function button to pick up the phone call and
stop the intercom simultaneously.
Pairing 2 Devices In Intercom Mode
1.
Before pairing, make sure there is no BIuetootI1°device active in your area.
2.
Make sure both receivers are turned off.
3.
Press and hold down the Power/Intercom button on both units at the
same time for approx 6 seconds, until “PAIRING” is displayed on the screen.
4.
Quickly press the Power/Intercom button on either of the receivers. it will
now search for the other receiver.
5. When they have successfully paired, and the receiver will beep once.
“INTERCOM” is displayed on the screen.
Pairing 3 Devices In Intercom Mode
1. There are three units, such as A, B, C units; A-B(A start intercom), A-C(A start
intercom), B-C(B start intercom) all of the pair successfully, and not respond to
any request of any other headset.
When A and B intercom, C press intercom button once, B headset will hear
connection request sound of “Du” three times. If C press intercom button twice,
A headset will hear of the beep of connection request.
When A and C intercom, B press intercom button once, C headset will hear
connection request sound of “Du” three times. If B press intercom button twice,
A headset will hear of the beep of connection request.
When B and C intercom, A press intercom button, C headset will hear
connection request sound of “Du” three times. If A press intercom button twice,
B headset will hear of the beep of connection request.
2. When A-B,A-C,B-C all of pair successfully, but without any intercom.
Press B once » and connect C » B and C begin to intercom.
Press B twice > and connect A > A and B begin to intercom.
Press A once > and connect C » A and C begin to intercom.