Press A twice » and connect B » A and B begin to intercom.
Press C once » and connect B » B and C begin to intercom.
Press C twice » and connect A » A and C begin to intercom.
How To Make Intercom Calls
1.
Starting intercom calls: Once the two headsets are paired with each other,
the headset will enter the intercom mode automatically.
2.
Finishing intercom calls: Press the “Power / Intercom" to terminate the
intercom call. If the TCOM-SC headset is playing A2DP music from the phone
before entering intercom mode, when the intercom call ends, the TCOM-SC
headset will reconnect to the mobile phone and the music will resume. (on
some manufacturer's phones, the headset can't restart music playing
automatically. In that case you need to restart the headset playing manually.)
3. Either of two T-COM-SC can initiate an intercom call to another by short
pressing the “Power / Intercom". You will hear a string of notes when
connection has succeeded.
Tip:
1.
If the intercom headset is in the status of connection with cell phone, intercom
will be automatically disconnected and answer the phone when there is a call.
Intercom will be automatic recovery after terminating the call.
2.
Operate effectively within a limited distance.
3.
It needs 5 seconds from the status of phone call to BIuetootI1'intercom.
To Play Music Via BIuetooth’Mp3 Player
If you are using a dedicated Mp3 player, the player must be a Bluetooth”enable
device and be paired your Motorcycle Bluetooth°receiver.
1. Select music to play directly from your music device (check your Mp3
player instructions for how to do this).
2.
Play music through the headset press the Multi-function button once.
“MUSIC" is displayed on the screen.
3.
Pause music press the Multi-function button again. “LOUIS" is displayed on
the screen.
4.
Skip songs forward by quickly flicking the Jog Wheel in a clockwise direction.
5. Rewind songs backward by quickly flicking the Jog Wheel in a anticlockwise
direction.
To Next Page