7.
Attach ear speaker to the felted pad. Run the
microphone arm along the inside wall of the
helmet, to where your mouth will be. the
microphone arm is flexible and should to adjusted
so it sits in the bast position in front of your mouth.
Some helmet have removable to run the speaker
and microphone under the padding.
B.
Connect the headset to the Bluetooth’receiver.The
plug can only be inserted in one orientation.
WARNING: Inserting the plug backwards will cause
damage to the Bluetootlfreceiver. Use caution
when assembling.
Secure the cord of the headset plug inside the
helmet. Tuck any extra wire into the helmet.
Ensure that only few centimetres of the cord
comes out.
You have successfully mounted the
motorcycle helmet Bluetooth”
To Next Page
Loading...