EasyManua.ls Logo

Spitwater SCWA68 - User Manual

Spitwater SCWA68
21 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
ORIGINAL INSTRUCTIONS
OPERATING AND MAINTENANCE
MANUAL
MADE IN AUSTRALIA
BY
SPITWATER AUSTRALIA PTY LTD
953 METRY STREET
NORTH ALBURY NSW 2640
AUSTRALIA
WARNING: Read and understand this instruction manual before operating this
unit and retain for future reference.
Failure to follow operating, safety and maintenance instructions outlined in this
manual releases the manufacturer from any responsibility for any accidents or
damage incurred and may render any warranty void.
PETROL COLD WATER
HIGH PRESSURE
CLEANER
MODEL NO:
SCWA68 (HE13200P)

Table of Contents

Questions and Answers

  • C
    Carrie LloydAug 11, 2025
    Why is my Spitwater Pressure Washer pump running but not reaching full pressure?
    • E
      emilythompsonAug 11, 2025
      If your Spitwater Pressure Washer's pump runs but doesn't reach the expected pressure, there are several potential causes. First, the pump might be sucking air; in this case, examine the hose and fittings for any leaks. Another possibility is a blocked nozzle. Try removing and cleaning the nozzle. Finally, a dirty water filter could be the culprit, so check and clean the water filter.
  • K
    krista34Aug 21, 2025
    What to do if my Spitwater Pressure Washer has fluctuating pressure?
    • R
      Ricky SmithAug 21, 2025
      Fluctuating pressure in your Spitwater Pressure Washer can stem from a couple of issues. The pump may be sucking in air, so check the hose and fittings for any leaks. Also, a dirty water filter might be the problem. Inspect and clean the water filter to resolve this.
  • A
    alyssa46Aug 31, 2025
    Why is my Spitwater Pressure Washer pump so noisy?
    • T
      theresa47Aug 31, 2025
      A noisy pump in your Spitwater Pressure Washer can be due to a few reasons. One common cause is the pump sucking in air; check the hose and fittings for any leaks. Another reason could be that the water inlet temperature is too high. Try reducing the water temperature to see if that resolves the noise.

Spitwater SCWA68 Specifications

General IconGeneral
BrandSpitwater
ModelSCWA68
CategoryPressure Washer
LanguageEnglish

Related product manuals