EasyManua.ls Logo

Spitwater SHW78 - User Manual

Default Icon
23 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
ORIGINAL INSTRUCTIONS
OPERATING AND MAINTENANCE
MANUAL
MADE IN AUSTRALIA
BY
SPITWATER AUSTRALIA PTY LTD
953 METRY STREET
NORTH ALBURY NSW 2640
AUSTRALIA
WARNING: Read and understand this instruction manual before operating this
unit and retain for future reference.
Failure to follow operating, safety and maintenance instructions outlined in this
manual releases the manufacturer from any responsibility for any accidents or
damage incurred and may render any warranty void.
ELECTRIC HOT WATER
HIGH PRESSURE
CLEANER

Table of Contents

Questions and Answers

  • J
    James KelleyAug 11, 2025
    How to fix a Spitwater Pressure Washer when the motor doesn't start?
    • M
      Mrs. Virginia EnglishAug 11, 2025
      If the motor does not start when you activate the switch, consider these potential causes: * The plug may not be properly connected. Ensure the plug is securely connected. * If your model has a low water cut-off, it might be activated. Check that the water or diesel tank is full, and add water or diesel as needed. * There may be no power supply. Contact an authorized electrician to inspect the power supply.
  • D
    david36Aug 18, 2025
    Why is my Spitwater Pressure Washer pump running but not reaching full pressure?
    • K
      Katie GordonAug 18, 2025
      If the pump is running but not reaching its rated pressure, there could be several reasons: * The pump might be sucking air. To resolve this, check the hose and fittings for any leaks. * The nozzle could be blocked or worn. Try removing and cleaning the nozzle. * The water filter might be dirty. Inspect and clean the water filter.
  • B
    Brandon HarrisAug 27, 2025
    What to do if my Spitwater Pressure Washer has fluctuating pressure?
    • C
      Cassandra BurchAug 27, 2025
      If your Spitwater Pressure Washer has fluctuating pressure, it could be due to: * The pump sucking air. Check the hose and fittings for leaks. * A blocked or worn nozzle. Remove and clean the nozzle. * A dirty water filter. Check and clean the water filter.
  • O
    Olivia CooperSep 2, 2025
    What to do if Spitwater SHW78 motor hums but won't run?
    • G
      gary57Sep 2, 2025
      If, when activated, the motor hums but doesn't run, it could be due to: * An incorrect extension cable. Replace it with an extension cord of the correct size and length, as described in the manual. * Incorrect or insufficient voltage or amperage. Contact an authorized electrician to check the power supply. * A failed capacitor. Contact a Spitwater service agent.

Spitwater SHW78 Specifications

General IconGeneral
BrandSpitwater
ModelSHW78
CategoryPressure Washer
LanguageEnglish

Related product manuals