9
Surround Monitor Controller 2489
Speakers On
The SPEAKERS ON buttons enable each surround speaker output (L, C, R, LS,
RS, LFE) and the stereo pair to be switched on and off independently.
Tip: If you are not using a surround speaker set, you can connect two stereo
speaker pairs to the SMC. Simply connect one pair to the STEREO SPEAKER
OUTPUTS and the second pair to the SURROUND SPEAKER OUTPUTS L and R.
Input impedance
Balanced (Sub-D) 50 kOhms
Unbalanced (RCA) ›10 kOhms
Output impedance
Balanced (1/4“ TRS) ‹600 Ohms
THD+N
-10 dB (Input level) 0.04 %
0 dB 0.01 %
+10 dB 0.006 %
+18 dB 0.002 %
+22 dB 0.1 %
Noise, A-weighted -98 dB
Maximum input level +22 dB
Dynamic response 120 dB
Common mode rejection
@ 100 Hz ›70 dBu
@ 1 kHz ›70 dBu
@ 10 kHz ›60 dBu
@ 100 kHz ›50 dBu
Frequency response 10 Hz-100 kHz (-3 dB)
Phase -36° (10-120 kHz, -3 dB center frequency)
Phase, linear 20 Hz-100 kHz
Dimensions H x W x D: 91 x 272 x 220 mm (3 9/16“ x 10 11/16“ x 8 21/32“)
Weight 2.3 kg (5 lbs)
SPL reserves the right to make technical changes without prior notice.
Operation
Technical Specifi cations
To Next Page
Loading...
