To Next PageTo Next Page
Need help?Do you have a question about the SportRack UPSHIFT PLUS Series and is the answer not in the manual?
General| Capacity | 2 bikes |
|---|---|
| Mounting Location | Hitch |
| Material | Steel |
| Number of Bikes | 2 |
| Type | Bike Rack |
| Fit Type | Universal |
| Installation Type | Hitch Mount |
| Hitch Class | Class III |
| Hitch Receiver Size | 2 inches |
Identifies individual parts of the SportRack system with corresponding item numbers.
Adjust and position the down tube holder assembly on the tray for mounting.
Attach rear bracket assembly and slide strap into tray channel.
Flex the tab upwards to ensure secure rear hardware.
Insert carriage bolts into the front plate for secure assembly.
Attach carrier to crossbars using bracket, washers, and knobs.
Center downtube, release handle, push slider, and engage handle.
Ensure handle is fully closed and jaws are secure on the bike downtube.
Slide the adapter onto the rear tire securing point.
Invert or remove the rear tire holder for mountain bikes.
Understand precautions for safe rack system use and cargo transport.
Adhere to load limits, ensure secure attachment, and check cargo periodically.
Be aware of cargo dimensions, driving behavior impact, and law compliance.
Details SportRack's warranty for car rack systems and accessories.
Specifies conditions not covered, liability disclaimers, and remedy limitations.
