How to fix a slipping running belt on SPORTSTECH sWalk?
If the running belt on your SPORTSTECH Treadmill is slipping, it's likely not tightened enough. To resolve this, you should tension the running belt.
What to do if SPORTSTECH Treadmill running belt falters during use?
If the running belt on your SPORTSTECH Treadmill is faltering during use, there are a couple of potential causes. It might not be lubricated enough, in which case you should refill the silicone oil. Alternatively, the running belt might be too tight, so try relaxing the running belt.
Why is the running belt not centered on my SPORTSTECH sWalk Treadmill?
If the running belt on your SPORTSTECH Treadmill is not centered, it's likely due to uneven tension. Adjust the running belt centrally to correct this issue.
What to do if my SPORTSTECH Treadmill does not switch on?
If your SPORTSTECH Treadmill doesn't switch on or start, first, ensure the power cable is properly plugged in. If it still doesn't work, check the electronic fuse. If the fuse has tripped, press the reset button located next to the power connection on the device.
General| Brand | SPORTSTECH |
|---|---|
| Model | sWalk |
| Category | Treadmill |
| Language | English |
To Next Page
