reference point such as the starting point of a trail. An “ ”
indicator will be appeared on the display.
Adjust the altimeter by using zero altitude adjustment
1. To select the adjustment display, press and hold the B button in
altimeter mode. Then press the B button to select among the zero
altitude, absolute altitude, sea level pressure and factory default
adjustment.
2. To adjust the watch by using zero altitude adjustment, press the
E button in zero altitude display, and the indicator “NO” will appear.
3. When the indicator “NO” is appeared, press the E button or C
button to select between “YES” (adjust the altitude to zero）or
“NO”(about the adjustment). When “YES” or “NO” is selected, press
and hold the B button to confirm the setting.
4. To restore the watch from relative altitude measurement, please
refer to the coming “absolute altitude adjustment”, “sea level
adjustment”, and “factory default adjustment” for more detail.
To Next Page