absolute pressure adjustment and factory default adjustment.
3. To adjust the watch by using factory default adjustment, press
the E button in factory default display, and the indicator “NO” will
appear.
4. When the indicator “NO” is appeared, press the E or C button to
select between “YES”(reset the watch to factory default) or
“NO”(abort the resetting).
1. To exit adjustment display, press and hold the B button for 2
seconds, and then the watch will go back to barometer mode. If the
“YES” display is selected when exit the adjustment display, the
“DONE” display will appear for 2 seconds prior to the normal
operation.
To Next Page