Spring Well SS+ - Page 15

Next Steps
77 to 81
are for SS4
Systems.
Refer to step 72
for SS1 systems.
Questions? Call (800)-589-5592 15
Setting Softener Values
78) Enter 48 for
48,000.
79) Select “Brine
Refill.”
80) Set the value to
10 minutes.
81) Correct values for
SS4 system.
82) Tap the menu
icon in the upper
left-hand corner.
83)The next step will
force you to regen
your system. During
this time you will not
be able to use your
water for 90
minutes.
84) Select “Regenerate
Now.”
85) Select “OK” from
the pop up and the
system will regen for
90 minutes.
86) Once the regen
is done, your system
is ready to use.
77) Tap “Resin
Grains Capacity.”
Steps
from here
apply to
both
versions
Salt-Based Water Softener