Springfield 91756 - Alarm Clock with Snooze; Setting the Alarm Time; Alarm Control; Max;Min Memory Function

ALARM CLOCK WITH SNOOZE
Setting the Alarm Time
Two different alarm times can be set. Alarm 1 and Alarm 2. Use MODE to scroll to Alarm 1 (A1) or
Alarm 2 (A2).
 To set Alarm 1; In normal time display, press the MODE button once and the Alarm 1 time and
(A1) will show
 Press the SET/AL button for 3-4 seconds until the alarm hour flashes
 Press UP or DOWN to set the alarm hour
 Press SET/AL and the minutes will be flashing
 Press UP or DOWN to set the alarm minutes
 Press SET/AL to lock in the settings The alarm is now activated and the alarm bell icon
will show next to the time
 Press MODE to get Alarm 2 or to return to normal time display
 If no buttons are pressed within 20 seconds, the unit will revert to the normal time display
automatically
 To set Alarm 2: When Alarm2 (A2) is showing on the display, follow the same set-up sequence
as for Alarm 1
De-activating the Alarm
To de-activate an alarm, press MODE to choose the alarm (A1 or A2) that you want to de-activate.
Press SET/AL until the alarm bell icon is no longer showing. Your alarm time settings will remain
and you can re-activate the alarm by following the instructions below.
Activating the Alarm
Press the MODE button to choose the alarm (A1 or A2) that you want to activate. Press SET/AL to
activate (the alarm bell icon and 1 or 2 will show). The alarm will sound at the time you have
entered.
Silencing the Alarm
 When the alarm sounds press any button on the base station to silence the alert or press SNOOZE
to activate the snooze function.
 When snooze is activated the Zzz symbol will appear and the alarm will sound again in 5
minutes.
 When the alarm sounds again, press SNOOZE to continue the snooze function or press any
button on the base station to discontinue snooze.
 The alarm icon will remain on the display and the alarm will sound every day at the pre-set time
until the alarm is de-activated.
MAX / MIN MEMORY
Use the MAX/MIN button to display the highest and lowest indoor and outdoor temperature and
humidity readings since the last reset.
 Press MAX/MIN once to display the highest readings recorded since last reset. MAX is on
display.
 Press MAX/MIN a second time to display the lowest readings recorded since last reset. MIN is
shown on the display.
 Press MAX/MIN to return to the normal display.
 To clear and reset the max/min records, when either the MAX or MIN record is shown on the
LCD screen, press and hold MAX/MIN for 3-4 seconds until the beep sounds.