Testing the System
71) Turn the bypass off and allow
water to flush through the system.
Allow the system to flush for at
least 5 minutes. Check for leaks.
70) Fully turn on the cold water
on a bathtub faucet in your
home.
67) There is a slot in the
mounting bracket to store the
spanner wrench.
69) Start with the bypass on to
check it for leaks prior to
flushing the combo system.
Congratulations, the
installation is now
complete.
Questions? Call (800)-589-5592 14
CF+ System
To Previous Page
Loading...
Need help?
General
