Sprout Immerse - Quick Start Guide; Charging Immerse; Bluetooth Pairing

LED INDICATOR
Solid blue LED indicates Immerse is switched on.
FLASHING
• Solid blue – Power on
• Flash blue/red – Power of
• Flashing blue/red – Bluetooth pairing mode
• Solid blue – Bluetooth connected
LED BATTERY INDICATOR
The batery LED indicator will flash from one to four
LEDs to indicate Immerse is charging. The lights will
stop flashing once Immerse is fully charged.
4. OPERATING CONTROLS
4 white lights on: Batery 76-100%
3 white lights on: Batery 51-75%
2 white lights on: Batery 26-50%
1 white light on: Batery 0-25%
• Weight: 1.9kg
• Output power: RMS 40W
• S/N ratio: 85db +/- 3db
• Frequency range: 90Hz - 20kHz
• Power source: 11.1V, 7800mAh lithium batery
• Playime: 4-5 hours from full charge at 75%
volume level
• Charging time: Approximately 2-3 hours
• Function: Bluetooth/ UNISYNC/ Aux-in/Microphone/
USB Type-C power output/ DC input/
Dual 10W wireless charging output
• Bluetooth version: 5.1
• Operating temperature: -10°C to 55°C
5. SPECIFICATIONS
98