Product Use and Care
06.
If you notice a muffling of audio after submersion,
gently shake Nomad 3+ to clear excess water. If your
speaker is exposed to salt water clean it thoroughly
after use with fresh water. Do not apply excessive
force to any surfaces of Nomad 3+ when wet or in
a wet environment.
Avoid prolonged exposure to ultraviolet radiation (UV)
sunlight or magnetic fields.
Check the rubber seal periodically for premature wear
and clean Nomad 3+ with a soft moist cloth and
ensure no objects such as dirt, hair or sand are on
the rubber seal ring. Do not use any oily solvent or
chemicals for cleaning.
15
To Next Page
Loading...
