Quick Start Guide
03.
Bluetooth Pairing
1. Switch on the main power switch.
2. Press power button for approximately three
seconds. Nomad Alpha single LED will ash blue/
red to indicate Nomad Alpha is ready for pairing*.
3. Turn on Bluetooth on your mobile phone/
music device
**
.
4. ‘Nomad Alpha’ will appear on your mobile phone/
music device. Select ‘Nomad Alpha’ to pair.
5. Once your mobile phone/music device is
connected to Nomad Alpha, you will hear
‘Bluetooth connected’***.
6. Enjoy your music
*If single LED is not ashing red and blue, hold UNISYNC
button for 5 seconds to initiate Bluetooth pairing.
**If you are not familiar with Bluetooth pairing for your
mobile phone or music device, refer to the user guide for
your mobile phone/music device for instructions to pair a
new device using Bluetooth.
***Nomad Alpha will always store the last device paired
and if the device is within Bluetooth range, Nomad Alpha
will automatically search & pair with the device.
07
To Next Page
Loading...
