Quick Start Guide
03.
Unlocking side panel cap
1. Turn the cap anti-clockwise
2. Lift the cap to detach
Locking side panel cap
1. Place the cap over the input panel
2. Turn the cap clockwise until tight*
*Nomad Alpha is only dust and waterproof when this cap
is properly closed.
Charging Nomad Alpha
1. Switch off the main power switch.
2. Connect the USB Type-C into Nomad Alpha input
5V/3A and connect the other end of cable into a
power source*.
3. Blue LEDs indicate the power level of charge**.
*Power source options include USB connection to
a Sprout AC power adapter, a Sprout car charger or
computer/notebook USB connection.
**Full charge will take about 8-10 hours. Please refer to
LED indicator section in this product manual.
Operating Nomad Alpha with auxiliary cable
To play music by using the auxiliary cable, connect
the Aux-in audio cable with your device or mobile
phone and Nomad Alpha.
06
To Next Page
Loading...
