SPT IM-101 User Manual (English)

Questions and Answers:

B
Brian HaynesJul 31, 2025
Why is my SPT IM-101 Ice Maker not making ice even though the cycle seems normal?
- E
  eric07Jul 31, 2025
  If your SPT Ice Maker is running a normal ice-making cycle but not producing ice, it could be due to a few reasons. First, the ambient temperature or the water temperature in the reservoir might be too high. Ensure the ambient temperature is below 90°F and use colder water. If that doesn't solve the issue, there might be a refrigerant liquid leakage or a blockage in the cooling system pipe. In these cases, further assistance is needed.
J
jerome15Aug 4, 2025
How to fix the flashing “ ” symbol on my SPT Ice Maker?
- M
  Molly WebbAug 4, 2025
  If the “ ” symbol is flashing on your SPT Ice Maker, it indicates a lack of water. To resolve this, stop the ice maker and refill the water reservoir.
M
michelleleonardAug 10, 2025
Why do the ice cubes from my SPT Ice Maker stick together?
- B
  Betty SmithAug 10, 2025
  If the ice cubes from your SPT Ice Maker are sticking together, it could be due to two main reasons: * The ice-making cycle might be too long. * The water temperature in the reservoir is too low. To solve this, stop the ice maker and allow the ice blocks to melt before restarting it. Also, select the small ice size option. Ensure that you are using water between 45°F and 90°F in the reservoir.
S
savannahalexanderAug 15, 2025
What to do if the “ ” symbol is displayed on my SPT Ice Maker?
- T
  Tammy DavidsonAug 15, 2025
  If the “ ” symbol is displayed on your SPT Ice Maker, it means that the ice basket is full. To solve this, simply remove the ice from the ice basket.
D
Donna MillsAug 19, 2025
What does it mean when the “ ” symbol is displayed on my SPT Ice Maker and how can I fix it?
- V
  Valerie PageAug 19, 2025
  If the “ ” symbol is displayed on your SPT Ice Maker, it indicates that the ice shovel cannot rotate. Check to see if ice cubes are blocking the ice shovel. If there are no obstructions, further assistance is needed.
T
Travis WardAug 25, 2025
What does it mean when the “ ” symbol flashes for 20 seconds on my SPT Ice Maker?
- A
  Ashley KingAug 25, 2025
  If the “ ” symbol flashes for 20 seconds on your SPT Ice Maker, it indicates that the ice-full detecting sensor is faulty and further assistance is needed.