6 | INSTALLATION, OPERATION and MAINTENANCE MANUAL
The following general safety precautions must be followed to avoid personal injury or
equipment damage:
Always observe any applicable local and national safety codes.
Always use appropriate protective gear, such as safety gloves, cut-resistant
sleeves, safety glasses and safety shoes when touching and handling the
equipment.
Follow correct personal and equipment lifting procedures while handling the
equipment.
Never expose the equipment to heat, aggressive chemicals or mechanical
impact that can cause damage.
Only qualified persons should handle and operate the equipment.
Upright GPHE’s can have a high center of gravity. Ensure the GPHE is stable.
Use foundation bolts if necessary.
The following procedures must be performed by qualified, trained
personnel who are familiar with this equipment. Operators must read and
understand all safety precautions and operating instructions included
with the GPHE. If the operator cannot read these instructions, operating
instructions and safety precautions must be read and discussed in the
operator's native language.
These products are designed for general use in normal environments.
These products are not designed for use in special work environments
such as: explosive, flammable, or corrosive. Only the user can determine
the suitability of this product in these conditions or extreme
environments. SPX FLOW can supply information upon request to assist
the user in making these decisions. Consult your nearest SPX FLOW
facility. (Listed on www.spxflow.com)
To Next Page
Loading...