16
4.2.2 General arrangement drawing
This general arrangement drawing provides
the same detailed information, as the
assembly drawing plus other customer
specified details.
4.2.3 PHE Plate Arrangement drawing
The plate heat exchanger is designed to
perform a duty (or duties) by arranging the
number and type of plates required in a
specific sequence. This arrangement is
represented schematically by the plate
diagram shown on the arrangement drawing.
The drawing summarizes the plates and
gaskets in the plate heat exchanger design.
The summary includes plate types, angles,
thickness and material, along with gasket
type, material and attachment method (glued
or clip in) and part no.
The assembly drawing summarizes
compressed plate pack dimension, total
weight and hold-up volume.
4.3 Name plate
Identification of the equipment is printed on
the nameplate (mounted on the head or
follower). When contacting APV for service
or spare parts, always refer to the serial
number on the nameplate.
To Next Page
Loading...
