2
If the operator cannot read these instructions, operating instructions and safety
precautions must be read and discussed in the operator’s native language.
WARNING: To prevent personal injury and / or damage to equipment :
• Read, understand, and follow all safety precautions and operating
procedures.
• Do not use this equipment in a manner not specified by the
manufacturer.
• Wear eye protection that meets OSHA standards. If using an optional
ultraviolet light to search for leaks, wear yellow UV goggles that
meet OSHA standards. Never stare directly into a UV light or shine
UV light on skin.
• Because of an evaporative system’s volatile fumes, use an inert
gas, such as nitrogen, when testing an EVAP system.
• Do not perform tests near a source of spark or ignition.
• Correctly connect the power supply to the battery and chassis
ground.
• The spotlight is designed for intermittent use only, not constant
use.
• If the spotlight is hot, do not touch the top part of the lamp or lens,
donotplaceitnearammableitems,anddonotputitawayfor
storage until it cools.
• Do not use the spotlight if it is damaged.
Safety Precautions