ACMM16WC0002 REV0.2 INSTRUCTION MANUAL DELAIR® ETSILINE COMMPACT
9
ACMM16WC0002 INSTRUCTION MANUAL DELAIR® ETSILINE COMMPACT
CHAPTER 2 PAGE 9
Environmental aspects
The use and maintenance of the air drier does not include environmental dangers. Most parts are made of
metal and can be disposed in the regular way. Optimal installation according to instructions and according
to good craftsmanship will result in minimal energy consumption and maximal life of your system.
According to EC-regulations electrical systems have to be disassembled and recycled at the
end of their life. SPX Flow technology can support you in this.
To improve the collection, treatment and recycling of electronics at the end of the life, special
requirements may apply to the disposal of this product. Please contact local authorities when
disposing this product. SPX Flow technology can support you in this.
IMPORTANT Make sure that instructions concerning health, safety and environment are compliant with
the local legislation and regulations.
Approvals
Safety and electromagnetic compatibility
This equipment has been tested and complies with the following European Standards
Directive for electromagnetic compatibility (EMC) 2014/30/EU EMC Directive
Waste Frame (WFD) 2008/98/EC
Directive on waste electrical and electronic equipment (WEEE) 2012/19/EU WEEE Directive
EN ISO 12100:2010
EN 61000-3-2:2014
EN 61000-6-1:2007
EN 61000-6-2:2005
EN 61000-6-3:2007
EN 61000-6-4:2007
NEN-EN-ISO 13857:2008
Quality assurance ISO 9001:2015
To Next Page
Loading...