SPXFLOW Delair EtsilineCommPact User Manual (English)

Questions and Answers:

L
lwilliamsAug 5, 2025
What to do if my SPXFLOW Delair EtsilineCommPact switches on and off frequently?
- B
  Brent NealAug 5, 2025
  If your SPXFLOW Dehumidifier is switching on and off frequently, also known as 'Hunting', there are several potential causes: * If the hose diameter is too small for its length (over 10 meters), causing high air resistance, use a larger hose diameter. * If the nipple inside diameter is causing air resistance, use nipples with a larger inside diameter. * If system leakage is too large, reduce the system air leakage. * If the remote sense valve is pulled out but not connected, push it back in. * If the operational pressure range is too small, increase it by adjusting the high and/or low pressure settings.
J
Jessica Lindsey MDAug 10, 2025
Why is my SPXFLOW Dehumidifier not running?
- J
  Jennifer FergusonAug 10, 2025
  If your SPXFLOW Dehumidifier isn't running, it could be due to a few reasons. The unit might be disconnected from the power supply, so check the connection and fix it if necessary. Other potential causes include the power switch being in the off position, an unreliable main power connection, or a defective main fuse or unit fuse.
S
Susan SilvaAug 15, 2025
What does 'RED. AL.' on my SPXFLOW Delair EtsilineCommPact Dehumidifier display mean?
- P
  Patricia Mora DVMAug 15, 2025
  If your SPXFLOW Dehumidifier display shows 'RED. AL.', it means the redundancy alarm flag is activated. The unit showing this alarm will be skipped in redundancy mode. To resolve this, you need to solve the initial alarm that triggered the redundancy alarm and then reset the redundancy alarm in the web-browser.
T
Tracy KramerAug 19, 2025
Why is the pressure too low on my SPXFLOW Dehumidifier?
- B
  Beth MorrisonAug 19, 2025
  Low pressure in your SPXFLOW Dehumidifier can stem from several issues. Check for air leaks in the connections between the air dryer and the system and fix them if needed. Other possible causes include excessive system leakage, incorrect pressure settings, a remote sense activated but not connected, air leakage between the pump manifold block, a defective pump, or a faulty pressure transducer.
F
francosandraAug 25, 2025
What does 'COM. AL.' mean on my SPXFLOW Delair EtsilineCommPact Dehumidifier display?
- C
  Cynthia WhiteAug 26, 2025
  If your SPXFLOW Dehumidifier displays 'COM. AL.', it indicates that the master unit is unable to communicate with the slave unit. Check the wiring and connectors to ensure they are properly connected. It may also indicate a faulty communication board or a faulty main controller board.
T
Tammy GrayAug 29, 2025
How to fix 'eth. Not avail' on SPXFLOW Delair EtsilineCommPact Dehumidifier display?
- R
  ryan11Aug 30, 2025
  If your SPXFLOW Dehumidifier displays 'eth. Not avail', it means the physical link between the air dryer and the network is missing. Ensure the network cable is connected to the air dryer and that it is connected to the network via a switch or router.

SPXFLOW Delair EtsilineCommPact Specifications

General

Brand	SPXFLOW
Model	Delair EtsilineCommPact
Category	Dehumidifier
Language	English

Summary

Introduction

General Product Overview

Description of the SPXFLOW Delair EtsilineCommPact air dryer and its features.

Manual Purpose and Scope

Explains the objective and coverage of the instruction manual for the air dryer.

Contact and Support Information

Provides manufacturer contact details for inquiries and support.

Symbols and Conventions Used

Explains safety symbols, warnings, and notes used throughout the manual.

Product Identification Plate

Details the information found on the dryer's identification plate.

Serial Number Validity

Specifies the serial number range covered by this manual.

Abbreviations and Safety Information

List of Abbreviations

Provides a list of abbreviations and their meanings used in the manual.

Safety Markings and Symbols

Details safety markings and international symbols used on the equipment.

General Safety Guidelines

General safety advice for correct use and operation of the air dryer.

Electrical Safety Precautions

Safety precautions related to electrical hazards during operation and maintenance.

Operational Safety Precautions

General safety guidelines for installation and operation, including environment.

Environmental Considerations

Information on environmental impact, disposal, and recycling of the equipment.

Approvals and Compliance

Lists relevant approvals and compliance standards for the equipment.

Electromagnetic Compatibility

Details compliance with European standards for EMC and safety.

Technical Specifications

General Technical Data

Lists general technical specifications such as operation, connections, and pressure.

Weight and Dimensions

Provides physical dimensions and weight for different mounting options.

Equipment Component Overview

Identifies and illustrates the main components of the air dryer.

Optional Components List

Lists components included with the power adaptor option 0281544.

Mounting Options Components

Lists components supplied with mounting options 0281565.

Equipment Purpose and Function

Explains the dryer's purpose: supplying dry air and maintaining system pressure.

Installation Location Guidelines

Guidance on suitable locations for installing the air dryer indoors.

Operating Environment Conditions

Specifies operating temperature, storage temperature, and humidity limits.

Space and Ventilation Requirements

Details required clearance for maintenance and proper ventilation.

Inlet Air Quality

Specifies the required quality of the inlet air for the dryer.

Electrical Power Requirements

Outlines the necessary power supply standards and consumption.

Functional Description

Air Drying Process

Describes the operational function of the air dryer, focusing on the drying phase.

Adsorber Regeneration Cycle

Explains the two phases of adsorber regeneration: heating and cooling.

Operational Cycle Overview

Details the dryer's 12-hour operational cycle and its sequential steps.

Remote Pressure Sensing

Explains how to measure working pressure at a remote location in the system.

Installation Procedures

Receiving and Unpacking

Instructions for handling received equipment, including checks for damage.

Claims for Shortage or Damage

Procedures for reporting missing items or shipping damage.

System Connection Guide

Steps for connecting the air dryer to the system, including safety warnings.

Air Tubing Connection

Detailed instructions and diagrams for connecting air tubing correctly.

Electrical Connection Guide

Instructions for making electrical connections to the unit.

Operating Instructions

Control Panel Overview

Describes the front panel controls, indicators, and digital display.

Moisture Indicator Functionality

Explains the moisture indicator's color changes and their meaning.

Rear Panel Connections and Fuses

Details rear panel connectors, including alarm and communication ports.

Power Input Connections

Describes the main voltage and 48Vdc power input connectors.

Alarm and Communication Ports

Details alarm connectors and optional communication ports.

Fuse and Pre-Start Checks

Information on the main fuse and essential pre-start checks.

Dryer Startup Procedure

Step-by-step instructions for starting up the air dryer.

Shutdown and Power Failure

Procedures for stopping the dryer and its behavior during power interruptions.

Internet Interface and Login

Accessing the dryer's status and settings via the internet interface.

Network Configuration Steps

Steps to configure static IP address for network connectivity.

Web Interface Homepage

Description of the main status screen of the web interface.

System Information Display

Displays general system information including software version.

Network Settings Configuration

Configuration of network parameters like IP address, Netmask, and Gateway.

User Credentials Management

Instructions for changing the default username and password.

Factory Reset Procedure

Configuration Settings

Device Configuration

Lists runtime counters and current device configuration details.

Operation Settings

Allows adjustment of operational parameters like pressure limits.

Alarm Settings

Configuration of various alarm levels and delays.

Event Log Management

Viewing, downloading, and resetting logged events.

Remote Sense Configuration

Configuration options related to the remote pressure sensing feature.

SNMP Configuration

Settings for Simple Network Management Protocol (SNMP).

Time and Date Settings

Allows adjustment of the device's internal clock time and date.

Soft Reset Procedure

Procedure to reset configuration settings to factory defaults via the web interface.

SPXFLOW Delair EtsilineCommPact User Manual

Table of Contents