Need help?Do you have a question about the SPXFLOW Universal 5000 Industrial Series and is the answer not in the manual?
General| Brand | SPXFLOW |
|---|---|
| Model | Universal 5000 Industrial Series |
| Category | Water Pump |
| Language | English |
General safety warnings, cautions, and operational notices for safe pump use.
Details on product warranty, handling of receiving inspection, and loss or damage claims.
Procedures for mounting the pump unit, including foundations and bases.
Guidelines for pump piping, support, expansion, layout, strainers, and gauges.
Procedures for aligning the pump and drive, including couplings and in-line drives.
Instructions for installing the relief valve to protect the pump and system.
A checklist of critical steps before operating the pump for the first time.
Instructions for pump lubrication, drive lubrication, and daily/process cleaning.
Inspecting rotors for wear on tips, splines, and hub ends.
Checking gear back lash and bearing condition by feel.
Procedures for maintaining packing seals and mechanical seals.
Detailed inspection and preventive maintenance tasks performed annually.
Information on returning pumps for factory reconditioning and warranty.
Steps for disassembling the pump's fluid head.
Procedures for removing the pump body with packing or mechanical seals.
Steps for removing shafts, bearings, and gears from the gear case.
Instructions for assembling bearings onto the pump shafts for different models.
Steps for assembling the rear bearings onto the pump shafts.
Procedures for assembling the gear case, including shims, seals, and shafts.
Details on packing seals and their replacement.
Information on external, internal, and double mechanical seals.
Instructions for flushing connections and typical piping setup.
Steps for assembling the rotors and cover onto the pump.
Guidelines and measurements for proper rotor to body clearances.
Tables of standard rotor clearances and suggested shim thicknesses.
Tables of torque values and press tonnage for assembly/disassembly.
Steps for installing and adjusting the internal by-pass relief valve.
List of parts for the internal by-pass relief valve.
Detailed parts lists and diagrams for 5040, 5050, 5060, 5070, and 5080 pumps.
Guidance on applying safety and identification labels to the pump.
To Next Page
